Free US shipping over $35·100+ prints per sheet·Made in USA since 2014
Home / Printers / Bambu Lab P1S
Compatibility · Bambu Lab

GeckoTek EZ-Stik for the Bambu Lab P1S

★★★★★ 4.8 · trusted by makers since 2014
HOT
Recommended: GeckoTek EZ-Stik HOT
Cut size: 256 × 256 mm · trim-to-fit
$7 / sheet
Find your size
Bambu Lab P1S with a GeckoTek EZ-Stik build surface installed

Specs & fit

Printer
Bambu Lab P1S
Bed footprint
256 × 256 mm bed
Stock surface
textured PEI
Chamber
Enclosed
Recommended sheet
GeckoTek EZ-Stik HOT
Cut size
256 × 256 mm

Why it works on the Bambu Lab P1S

✓Trim the EZ-Stik HOT sheet to the P1S's 256 × 256 mm — cut to fit with household scissors.
✓Lays over the stock textured-PEI plate for an ultra-smooth, consistent bottom finish most plates can't match.
✓Rated for the enclosed, high-temperature chamber this printer runs.
✓Strong first-layer adhesion for ABS, PETG and nylon; parts pop off clean once the bed cools. 100+ prints per sheet.

More Bambu Lab printers

Bambu Lab A1 with GeckoTek
Bambu Lab A1
HOT · 256 × 256 mm →
Bambu Lab A1 mini with GeckoTek
Bambu Lab A1 mini
HOT · 180 × 180 mm →
Bambu Lab H2D with GeckoTek
Bambu Lab H2D
HOT · 350 × 320 mm →
Bambu Lab P1P with GeckoTek
Bambu Lab P1P
HOT · 256 × 256 mm →

Stick. Print. Pop. Done.

One $7 sheet, cut to your Bambu Lab P1S. The smooth, reliable bottom your prints have been missing.